Programming with cable PC-69 for a PD370/ PD372/ PD375 - TD370/ TD372/ TD375
Download Mode :
For a portable radio, hold the PTT and the orange button on top whilst turning the radio on. Once in the download mode, start the upgrade software. Select “USB1” in the “port” drop down menu and click “upgrade”. After upgrading, turn the radio off and back on. If you have a mobile radio, change the switch on the end of the programming cable to the “CPS” position before turning back on to allow programming.
Using the Programming cable PC-69 for a PD370/ PD372/ PD375 - TD370/ TD372/ TD375
download mode : HOLDING - button below PTT and power on
Radio is Restarting 44%
Radio is Reading ... to 51%,
ERROR : RCDB FAIL
I have an error at 51%
Using Firmware - Hytera Radio Upgrade Kit(T3-P3)
PD(TD)3_MAIN_V2.05.05.001.bin
SCT3928DD_UpdateFlash_V2_01_05PD.hex
SCT3928DV_UpdateFlash_V2_01_05PD.hex
with
Hytera-TD370 V1.04.04.012 Installation
TD370 Asian version - 1.04.04.12.chs
Problem is this a version issue ??? What could be the issue or the problem.
hamamateurradio (at) gmx.tm
No comments:
Post a Comment
A discussion group about this subject.
Digital Ham Radio / Amateur Radio
DigitalHamRADIO@groups.io
https://groups.io/g/DigitalHamRADIO
****** share this with others *******
Amateur Radio Users Support Group
AmateurRadio@groups.io
https://groups.io/g/AmateurRadio
****** share this with others *******
Note: only a member of this blog may post a comment.